![]() |
SH-9 SENSOR & MI-9 MOISTURE AND TEMPERATURE METER
Measurement of moisture in soils, ground, substrates, compost.
Analyser probe with 3 built-in sensors for absolute humidity and temperature measurement in soils.
|
OPERATION DESCRIPTION - The measuring equipment consists of a moisture meter, portable, "MI-9" with interchangeable sensors, probe "SH-9" type nozzle 30 mm in diameter and 1 meter long, which has 3 humidity sensors , 20 cm apart from each other and a plastic tube of 40 mm diameter and 1 meter long, which is buried in the ground representative location and serves as protective cladding of the probe. - For the determination of moisture, the probe is inserted into the tube buried, so that the sensors are installed to 20 cm, 40 cm and 60 cm depth, so that they can register 3 moisture levels in the same zone. - Once the reader displays the data obtained, these are stored in its memory. - This form of measurement facilitates insertion of the probe into the ground, reducing wear thereof, and that is not buried directly and increases the accuracy of the readings, because the ground is not modified. - Can take readings at various points of the terrain, installing each corresponding sensor cladding tube. - During the read operation, each measurement can be identified with a number in the analyzer for further study, after being stored in the memory. - The reader includes factory calibration for 3 types of soil: sand, silt and clay. - Calibrations show directly the percentage of field capacity. - You can also measure soil temperature using the temperature lance "ST-2/50" connected to the analyzer "MI-9". SH-9 SENSOR FOR MI-9 MOISTURE & TEMPERATURE METER - 3 Moisture sensores for reading to 20, 40 and 60 cm of prof. - Simultaneous reading of the sensors. - Directly expresses the moisture content referred to the field capacity. - 3 Types of calibrations for soils: Clay, Silty, Sandy, with the MI-9 reader or measuring head. - Automatic temperature compensation. - Moisture range 0 to 100% of field capacity. - Resolution 1 %. - Sensor dimensions: diameter 25 mm and length 1 meter. - Protect tube dimensions: diameter 40 mm and length 1 meter. MI-9 MOISTURE & TEMPERATURE METER - Lateral connector for interchangeable sensors of moisture and temperature. - Direct readout and automatic correction of the measurement by temperature. - Alphanumeric display of 2 lines by 16 characters. - Range of moisture reading in display: 0 to 100%. - The version standard includes calibrations for 11 grains, hay bales or cubes and row of hay. - Function for standard calibration adjust by means of equalization of the calibration chart. - Memory of 50 measurements. - Power battery of 9 volts. - Dimensions and weight: length overall 19 cm., width 9,5 cm., prof 3,5 cm., weight 300g. BASICS FUNCTIONS - Moisture measurement - Temperature measurement - Last measurement reading - Standard or factory calibrations adjust MI-9/PC MOISTURE & TEMPERATURE METER - Programmation system of calibrations for new products. - Storage in memory 70 patterns samples. - Programmation of new products. - Clear calibrations - Modification of calibrations COMPUTER CONNECTION - Output connector for comunication to PC. - Software for storage measurements and calibrations. |
![]() |
SH-9 SENSOR & MI-9 MOISTURE AND TEMPERATURE METER
Measurement of moisture in soils, ground, substrates, compost.
Analyser probe with 3 built-in sensors for absolute humidity and temperature measurement in soils.